Sealing By A Padlock; Interlocking And Unlocking Of Measuring Holes - WEG FSW 400 Manual De Instrucciones

5.2. SEALING BY A PADLOCK

Close the cover (acc. to chapter 1.2);
g
Place a padlock in eye 3 of sealing element (Figure 29).
g

5.3. INTERLOCKING AND UNLOCKING OF MEASURING HOLES

Interlocking and unlocking of measuring holes is possible when fuse links are not in the
cover.
Take off the cover (acc. to chapter 1.3);
g
Move down a slide of the cover until it gets closed measuring holes (Figure 27);
g
In order to interlock please move locking elements according to the direction showed
g
by arrow until skip is reached in side guides of the cover (Figures 30, 31);
In order to unlock move interlocking elements according to direction showed by arrow
g
until skip is reached in side guides of the cover (Figure 32).
Instruction manual for mounting and service of fuse switch disconnectors
Figure 30
Figure 32
www.weg.net
Figure 31
17