Manual Control - PRO LIFTS VMB ShowLift AED-SL18 Manual De Instrucciones

Torre show electrónica
Tabla de contenido

Publicidad

Quick operation guide

MANUAL CONTROL

Whenever the MANUAL option is selec-
ted the lift can move up and down at a fi-
xed speed, manually using the UP
DOWN
buttons in the MANUAL UP/
DN option.
4 MANUAL
< 250 > 3,95 MTS
DMX values for height from 0 to 255.
HEIGHT AND SPEED RESTRICTIONS
It is possible to set maximum and mini-
mum restrictions for the position of the
lifter. In the option MAX HEIGHT and MIN
HEIGHT press the RIGHT
edit, then select the desire DMX value by
pressing the UP
finally press the central button "Enter" to
store the current position as the maxi-
mum or minimum height.
5 MAX HEIGHT
255 / 4,00MTS
5 MAX HEIGHT
< 255 > 4,00MTS
5 MAX HEIGHT
< 250 > 3,95MTS
CAUTION:
The DMX value of the minimum height
can not exceed the value of the maximum
height, and this in turn can not be less
than the minimum height.
The height and speed restrictions apply in
both manual and DMX mode.
PRO LIFTS S.L.
and
button to
or DOWN
buttons,
6 MIN HEIGHT
1 / 1,50MTS
6 MIN HEIGHT
< 1 > 1,50MTS
6 MIN HEIGHT
< 128 > 2,75MTS
Depósito legal y copyright 2018. Todos los derechos reservados.
ENGLISH
If when modifying the height restrictions
the value reaches the current height of
the tower, the lifter will NOT move to the
minimum or maximum position that is
being restricted at the moment.
TRAVEL COUNTER:
The tower has two travel counters, in the
option of "TRAVEL METERS" in the menu
it is possible to choose the display of the
partial travel (since the last revision of the
lift) or the total travel.
To select between the two options press
the RIGHT
button, and then press the
UP
and DOWN
The screen will show the following infor-
mation:
9 TRAVEL METERS
< SHOW PARTIAL >
9 TRAVEL METERS
P: 15030 MTS
Finally press the central button "Enter" to
keep the choice and exit to the menu.
CAUTION:
The system does NOT allow to editing:
1 - Menu option: DMX / MANUAL if:
- When in DMX mode the lifter is moving.
- When in MANUAL mode the lifter has
lost the "0" reference and/or is in a posi-
tion out of the limits of the min. height or
max. height restrictions.
2 - DMX Address, DMX Scaling, MAX
HEIGHT or MIN HEIGHT if:
When the lifter is in DMX mode.
button.
9 TRAVEL METERS
< SHOW TOTAL >
9 TRAVEL METERS
T: 65030 MTS
12

Publicidad

Tabla de contenido
loading

Tabla de contenido