Tabla de contenido
Publicidad
Quick operation guide
Patch panel for the
top fixture:
6.6 - Signal communication
connections:
To establish communication between the
machine and the DMX console, use 5-pin
XLR connectors, located at the lower
patch panel.
DMX connections are also separate, on
one side, the signal connection for the
Showlift itself, and on the other, comple-
tely independent, the signal connection for
the equipment that would be mounted on
the top tray.
6.7 - Connecting the equipment on the
top tray:
Once the towerlift connections have been
established, connect the power of the equi-
pment located on the top tray with true1
power connectors, and 5-pin connector for
the DMX signal. Connect the cables to the
junction box located on the tray.
7. - OPERATION PANEL
INSTRUCTIONS
Navigation buttons:
Top button = UP
Bottom button = DOWN
Left button = ESCAPE
Right button = EDIT or ENTER
Center button: SAVE & ESCAPE
PRO LIFTS S.L.
POWER
DMX SIGNAL
MAIN MENU
SYS OK MANUAL
POS: 0 / 1,50MTS
1 DMX / MANUAL
<DMX / MANUAL>
2 DMX ADDRESS
<1 to 512>
3 DMX SCALING
<ACTIVE / INACTIVE>
4 MANUAL UP / DN
<HEIGHT in DMX/ MTS>
5 MAX HEIGHT
<DMX> MTS
For navigating through the main menu op-
tions press UP
The first line indicates the menu name and
the second line its value.
Depósito legal y copyright 2018. Todos los derechos reservados.
ENGLISH
ETHERNET SIGNAL
UP
SAVE +
ESC
ESCAPE
DOWN
6 MIN HEIGHT
<DMX> MTS
7 MAX SPEED
<DMX 0-255>
8 DEAD MAN
<ACTIVE / INACTIVE>
9 TRAVEL METERS
<PARTIAL / TOTAL>
10 RESET
<POSITION / FACTORY>
or DOWN
EDIT
buttons.
8
Publicidad
Tabla de contenido
