Quick operation guide
ENGLISH
3. SAFETY PRECAUTIONS.
3.1 - The Showlift is a machine designed to elevate
loads upwards in a vertical direction, It should NEVER
be used as a platform to elevate people.
3.2 - Only place the lift on hard, flat surfaces always
checking that it is in a vertical position. Adjust the outri-
gger stabilisers by turning the cranks to level if neces-
sary. NEVER use wedges or other foreign objects to
balance the lift.
3.3 - The maximum load indicated on the characteristics
label and the instructions manual should not be excee-
ded.
3.4 - This lift should NEVER be used to elevate a load
that has not been properly checked. It is necessary to
verify that the load is correctly supported and centred
on the appropriate lift support so that the weight of the
load will only elevate in a vertical direction.
3.5 - NEVER use the lift on a vehicle or any other mobile
surface.
4
PRO LIFTS S.L.
Depósito legal y copyright 2018. Todos los derechos reservados.