Promax TV EXPLORER HD ISDB-T/T B Manual De Instrucciones página 211

USER'S MANUAL TV EXPLORER
In order to define and/or to send a sequence of DiSEqC commands, press the
DiSEqC key [21] on frontal panel. It allows to define the satellite band configuration
parameters and select through SEND function one of the eight predefined programs
which execute basic functions to control an universal switch with two or four inputs, by
means of the rotary selector
Whenever a DiSEqC program is sent, the commands that correspond to the
equipment status in relation to the Horizontal or Vertical polarization and High or Low
frequency band are also sent. This allows assuring that the installation status is the one
indicated by the equipment.
The COMMANDS option from DiSEqC menu allows to execute any of the
following commands:
CHARACTER
General
Non-assigned Switch
Assigned Switch
Positioner
10/2012
HD ISDB-T/T
B
[1].
Figure 68.- DiSEqC command screen.
COMMAND
POWER
RESET
STANDBY
SAT A/B
SWITCH 1
SWITCH 2
SWITCH 3
SWITCH 4
POSITION A/B
SWITCH OPTION A/B
DISABLE LIMITS
ENABLE LIMITS
LIMIT EAST
LIMIT WEST
DRIVE EAST SEC.
DRIVE EAST STEPS
DRIVE WEST SEC.
DRIVE WEST STEPS
GOTO POSITION
HALT
STORE POSITION
RECALCULATE
Table 5.- Available DiSEqC commands.
ASSOCIATED PARAMETER
---
---
---
A / B
A / B
A / B
A / B
A / B
A / B
A / B
---
---
---
---
1 to 127
1 to 127
1 to 127
1 to 127
1 to 255
---
1 to 255
1 to 255
Page 95