Delete Capture; Print Screen Function - Promax TV EXPLORER HD ISDB-T/T B Manual De Instrucciones

5.18.2 Delete capture

Also it is possible to delete the stored screens. For it, accede to the Utilities menu
[22] and after activating this function, select one of the following options according
to the model and type of capture that has been done:
constell/
sp/
other/
When pressing with the rotary selector
that contains the names of the stored files. Select one by means of the rotary selector
[1] or press EXIT.
5.19

PRINT SCREEN function

It is also possible to save anything that appears on the screen of the meter using
the "PRINT SCREEN" function. To save an image you only need to press the key
[10] during a few seconds. A file with the screen content in bit map format (bmp)
will be generated automatically. These files can be viewed later with the VIEWPRINT
SCREEN function or using any program that supports .bmp formats.
If the option CAPTURE TIMESTAMP at the PREFERENCES menu is enabled
(ON), each captured image will be marked with the date and time of capture.
To delete one or more of the captured images, press
DELETE PRINT SCREEN. You will see a list of captured screens files. To delete a file,
place on it and press the rotary selector
option and press the rotary selector
delete all the screenshots.
NOTE: You cannot use this function in the case of OSD messages.
Page 82
Deletes a constellation diagram.
Deletes a frequency spectrum.
Deletes any other kind of capture.
USER'S MANUAL TV EXPLORER
[1] over the option will appear a menu
[1]. To delete all stored files place on ALL
[1]. A window pops up asking for permission to
HD ISDB-T/T
B
[22] and select
10/2012