CD PLAY
Intro play
Press INT during CD play.
The "SCAN" indication lights up, and the first 10
seconds of all the tracks on the CD are played in
order.
When the desired track is found, press INT again.
The unit returns to normal CD play.
Repeat play
Press REP1 during CD play.
The "REPEAT 1" indication lights up, and the
currently selected track is played repeatedly.
Press REP1 again to cancel Repeat play.
Note
If Repeat play is not activated, all the tracks on
the CD are played repeatedly.
Random play
Press RANDOM during CD play.
The "RANDOM" indication lights up, and the
tracks on the CD are played in random order.
Press RANDOM again to cancel Random play.
Note
During Random play, even if r is pressed
repeatedly, it won't take you back to previous
tracks, only to the beginning of the current track.
11
ENGLISH
SOUND ADJUSTMENTS
1
Press SELECT repeatedly to select the
mode that you wish to adjust from:
BASS, TRE (treble), BAL (balance), FAD
(fader) and VOL (volume).
Each time you press SELECT, one of the
following indicators appears, in cyclic order.
If you do not proceed with the following step
2 within 5 seconds, the selected mode is
canceled, and the indication returns to the
current source mode.
2
Rotate the Jog Dial to adjust the level.
Adjust each mode referring to the audio
control indications in the display window.
Counterclockwise
Decreases the
bass level
Decreases the
treble level
Decreases the
level of the right
speaker(s)
Decreases the
level of the front
speakers
Decreases the
volume level
Without selecting any mode with SELECT,
only the volume level can be adjusted by
rotating the Jog Dial.
MUTE button
Press this button to temporarily lower the volume.
Press it again to restore the previous volume.
The "MT" indicator flashes while the mute function
is active.
Clockwise
Increases the
bass level
Increases the
treble level
Decreases the
level of the left
speaker(s)
Decreases the
level of the rear
speakers
Increases the
volume level