Aiwa CDC-X907M YU Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SOUND ADJUSTMENTS
Automatic Volume Control
(auto-volume)
With the auto-volume function, the volume is
automatically adjusted for the surrounding noise
level. As the noise becomes louder, the volume
increases step by step (up to 4 steps). As the
noise decreases, the volume decreases toward
your setting.
1
With the unit off, press and hold SELECT
for more than 2 seconds.
The "BEEP ON" or "BEEP OFF" indication
appears.
2
Press TUNE i or TUNE k to select the
auto-volume mode.
The "A-VR ON" or "A-VR OFF" indication
appears.
3
Rotate the Jog Dial to select "A-VR ON"
or "A-VR OFF".
4
Press SELECT.
13
ENGLISH
Source Level Adjuster
You can adjust the output level in each mode to
equalize the volume level.
1
Press FUNCTION repeatedly to select
the desired mode.
2
Press DISP while pressing SELECT.
The "LEVEL 0" indication appears.
3
Rotate the Jog Dial to adjust the level.
Rotate clockwise to increase the output level.
Rotate counterclockwise to decrease the
output level.
If you do not operate the Jog Dial within 5
seconds, this function is canceled, and the
indication returns to the current source mode.
Returning to the factory settings
Adjusted settings of VOL, BASS, TRE, BAL,
FAD, H-BASS, DSSA, and source level can be
returned to the factory settings with a simple
operation.
1
With the unit off, press and hold DISP
for more than 2 seconds.
The "LEVEL--" indication appears, and all
sound settings are returned to the factory
settings.

Publicidad

Tabla de contenido
loading

Tabla de contenido