Steering-Wheel-Mounted Remote Control Unit - Aiwa CDC-X907M YU Manual De Instrucciones

STEERING-WHEEL-
MOUNTED REMOTE
CONTROL UNIT
Precautions
• When the infrared receptor on the main unit is
exposed to direct sunlight, it may not respond to
signals from the remote control unit.
• While driving, keep your eyes on the road as you
operate the remote control unit. NEVER operate
the remote control unit while turning.
• Do NOT install the remote control unit where it
may hinder the function of any safety device,
such as an air bag.
• Be sure to install the remote control unit securely
on the steering wheel. Unstable installation
may interfere with operation of the vehicle.
• Do NOT install the remote control unit where it
will obstruct your view of the instrument panel.
• Be sure to install the remote control unit on the
side of the steering wheel closer to the main
unit. If you install the remote control unit on the
opposite side from the main unit, the infrared
signal may not reach the main unit's receptor,
disabling remote operation.
Supplied mounting kit
The letters below are keyed to those in the instructions.
Use only the supplied mounting hardware for safe and secure installation.
a Allen screw M3 × 4 (1 ea.)
b Allen wrench (1 ea.)
17
ENGLISH
• There may be cases in which the infrared signal
does not reach the infrared receptor on the main
unit, depending on the installation location.
• Do NOT install the remote control unit on the
outer rim of the steering wheel. Doing so may
hinder steering and cause a traffic accident. Be
sure to install the remote control unit on the
inner rim of the steering wheel.
CAUTION
Modifications or adjustments to this product, which
are not expressly approved by the manufacturer,
may void the user's right or authority to operate
this product.
c Cushion (2 ea.)
d Belt (1 ea.)
e Inner belt holder (1 ea.)
f Outer belt holder (1 ea.)