IKRA EGN 2500 Manual De Instrucciones página 14

4.5 Service
• Have the power tool serviced by qualified tech-
nical personnel only; repairs should be carried
out using exclusively original spare parts. This
will ensure the continued safe operation of the
power tool.
5. Safety Instructions for the Garden Shred-
der
• Wear protective gloves, glasses, and ear pro-
tection. Do not wear loose-fitting clothing.
• Always position the unit so as to be secure and
balanced. Do not lean on the unit.
• The machine must be located on an even, sta-
ble surface during operation.
• Before using, ensure that all screws and nuts
are tightly fastened.
• Only use in dry conditions and never during
rainy weather.
• Do not use the machine with damaged pro-
tective equipment or without protective equip-
ment.
• Keep hands, other body parts and clothing well
away from the feeding funnel and the ejection
shaft.
• • Never place your face or other body parts in
the proximity of the feeding funnel.
• Do not leave the machine unattended. Shut off
the motor and unplug the unit.
• Do no feed any hard objects into the funnel
such as stones, bottles, cans or pieces of met-
al. This could damage the machine.
• If the machine becomes blocked: shut off the
motor, unplug the unit, remove all objects from
the machine and check it for damages.
• If the fuse has blown or the overload protec-
tion has been triggered, this means that the
machine was overloaded and/or that too many
devices are connected to the same extension
lead. Look for the cause and fix the problem.
Do not install a stronger fuse.
• Do not pull on the extension lead. Do not make
the lead too tight. This could damage the plug
or the cable insulation. This type of damage
may not be visible, but can be dangerous.
• Always keep the extension lead away from the
machine. Remove the plug from the socket
and check the cable regularly for signs of dam-
age or aging. Do not use the machine with a
damaged extension lead.
• If the cable is damaged, it must be replaced by
a specialist in order to prevent accidents.
GB | Operating Instructions
• Never move the machine by pulling the cable.
• Before using the shredder for the first time it
• Only use extension leads which are suitable
• Before using the unit ensure that there is no
• Always shut down the shredder before unplug-
• Keep children and animals away from the
• Children or individuals who have not read
• The user of the device is responsible for third-
• The shredder may only be used for its intended
• Before undertaking any repair or cleaning
• You do not have the right to remove or modify
• Only use the shredder during daylight or with
• Never place your hands in the feeding funnel
• If the unit emits unusual sounds or vibrations,
• Ensure that the blade is firmly attached before
• The shredder must be inspected carefully be-
• Worn out or damaged components must be re-
GB-4
Do not move the machine while the motor is
running.
must be assembled properly.
for the outdoors.
damage to/problems with the cable.
ging the cable and/or extension lead.
shredder. All others must keep a safe distance
from the shredder when it is operating.
these instructions or who are not familiar with
the shredder may not use the device.
parties during operation.
purpose.
WARNING: This device has a rotating
blade.
WARNING: The blades do not stop mov-
ing immediately when the device is shut
down.
work, shut down the shredder, remove the plug
from the outlet, and wait until the blade comes
to a complete stop.
electric or mechanical protection equipment.
strong artificial light.
or the ejection opening.
turn off the motor and look for the cause. In
general, vibrations are a sign of problems.
you use the shredder. The device can only be
operated with a properly installed blade.
fore use. Only use machines that are in proper
functioning order. If you discover any damage
on or problems with the device which could
pose a risk to the user, have the damage re-
paired before using the machine again.
placed immediately for reasons of safety. Only
use original replacement parts. Using non-