3. To switch on the device, press and hold the ON/OFF/speed button for 1 second. The brush attachment will begin to
rotate.
4. The device features a slow, medium and fast speed setting. To switch between the individual speed settings, briefly
press the ON/OFF/speed button. The selected speed setting is displayed via the corresponding LEDs that are lit up.
5. Using the rotation button, select your desired rotation level. The device has circular rotation for gentle facial cleansing
and oscillating rotation for thorough facial cleansing.
6. Now apply the device gently to your face and cleanse your facial skin using even movements to remove residue, dirt
and dead skin cells.
Note
To ensure comfortable treatment, do not apply the rotating brush attachment too firmly to the skin. Treat each section
of skin for a maximum of 20 seconds only.
The brush features a 1-minute timer and stops every 20 seconds for 1 second to indicate that you should switch to
cleansing a different area. The facial brush switches itself off automatically after 3x 20 seconds. The recommended
application period per use is 1 minute.
7. Switch off the device after use. To switch off the device, press and hold the ON/OFF/speed button for 1 second.
8. Cleanse your face thoroughly with water to remove any residue from your skin.
9. Pat your skin dry with a towel and then apply a moisturising cream using even, circular movements.
9.
Cleaning
9.1 Cleaning the brush attachments
IMPORTANT
Before beginning cleaning, pull the attachment up and off the device.
• Clean the attachment thoroughly with water after each use.
Note
The washable cotton pad can also be washed in the washing machine if required.
9.2 Cleaning the device and the charger
• Only clean the appliance in the manner specified.
• Clean the unit after use with a soft, slightly moistened cloth. In case of more extreme soiling you can also moisten the
cloth with mild soapy water. Do not use any abrasive cleaning products.
• Ensure that the device is fully dry before placing it into the charger.
• Ensure that no water enters the device. If this should happen, the device should only be used again once it has fully
dried out.
• Clean the charger from time to time with a soft, slightly damp cloth.
• Protect the device from impacts, humidity, dust, chemicals, marked temperature fluctuations and nearby sources of
heat (ovens, heaters).
10. Disposal
• The empty, completely flat rechargeable batteries must be disposed of using specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the rechargeable batteries.
• Remove the battery from the facial brush by removing the brush head and taking out the battery.
• The codes below are printed on rechargeable batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.
14