Tabla De Contenido; Symbols; About This Manual - Festool ETS 150/3 EQ Manual De Instrucciones

Contents
Symbols .............................................................3
About this manual ..............................................3
Safety rules .......................................................4
General Power Tool Safety Warnings ................ 4
Machine-related safety instructions ................. 5
Technical data ....................................................5
Intended use ......................................................6
Electrical connection and operation ..................6
Extension cord ................................................... 6
Tool settings ......................................................6
Electronic control .............................................. 6
Dust extraction .................................................. 7
Attaching sanding material ............................... 7
Choice and installation of the grinding disks ... 7
Working with the tool ........................................8
Maintenance and care .......................................9
Sanding base brakes ......................................... 9
Accessories, tools .............................................9
Disposal ............................................................10
Save these instructions
It is important for you to read and understand this manual. The information it contains relates to protecting
your safety and preventing problems. The symbols below are used to help you recognize this information.
DANGER
WARNING
CAUTION
NOTICE

About this manual

Description of imminent hazard and failure to avoid hazard will result in death.
Description of hazard and possible resulting injures or death.
Description of hazard and possible resulting injuries.
Description of possible damage of the device or its surroundings.
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear protective goggles
Wear ear protection
Wear a dust mask
V Volts
A Amperes
Hz Hertz
W Watt
~ Alternating current
n No load speed
0
Class II Construction
rpm
min Revolutions per minute
-1
spm Strokes per minute
Ø Diameter
3

Symbols