How To Cancel The Key Cd; How To Change The Key Cd; How To Resume Normal Operation (Esn Security Lock Out) - Eclipse CD5000 Manual Del Propietário

Various Settings

How to cancel the Key CD

Check that the main unit is in
1
standby.
Press and hold the [FUNC] button,
2
then the button [6], and hold both
for more than one second.
A [SEC] message appears, then in two
seconds it will change to [DISC].
3
Press the [CD
The front panel opens; The CD5000 is
now ready for your Key CD in the CD
slot.
ATTENTION
If a CD has already been inserted, a [SEC]
message appears, and then the front panel
opens and the CD is ejected.
4
Insert your Key CD into the slot.
A [CANCEL] message appears, then
the Key CD is ejected.
The Key CD is canceled.
ATTENTION
• This process cancels the protection of ESN
main unit.
• If power to the
disconnected, then reconnected, a Key CD
will not need to be inserted in order to
return the main unit to normal operation.
• Inserting a CD other than the Key CD will
not cancel the protection. Instead, the
display [ERR] for two seconds, then the
normal CD playback mode will activate.
36
] button.
ESN main unit is
5
Press the [CD
The front panel closes.

How to change the Key CD

1
First, cancel the existing Key CD.
Refer to "How to cancel the Key CD".
2
Next, program a new Key CD.
Refer to "How to program the Key
CD".
How to resume normal operation
(ESN security lock out)
If power is disconnected while ESN security is
active (a Key CD was programed), operation
is disabled until power is restored and the
main unit unlocked. Follow this procedure to
resume normal operation.
When the power is turned on after
1
disconnecting the battery power, a
[SEC] message will appear for two
seconds. Thereafter, the message
changes to [DISC] and the press
the [CD ]
CD5000 is ready to accept your
Key CD in the slot.
2
Insert your Key CD.
If the correct CD is inserted, an [OK]
message will appear for two seconds
and the CD will begin playing.
] button.
button, then the