Changing The Area Shot Mode - Eclipse CD5000 Manual Del Propietário

ATTENTION
When using a Memory Stick:
• Data downloaded from the ECLIPSE web
site (E-iSERV) can be saved in folders on
the Memory Stick as follows:
MSFTEN
AREA
XXXXXXXX.ast
• Files that can be imported into the main unit
are created automatically when downloaded
from the E-iSERV web site.
• All of the searched route maps and
guidance information are stored in these
files created automatically.
• The file name can be changed using 8
alphameric characters (space cannot be
used).
When using a CD-R:
• The main unit can only import files from CD-
R that have been written in root directories.
XXXXXXXX.ast
• Disc formats that may be used are as
follows:
•CD-ROM (MODE 1)
•CD-ROM (MODE2_FORM 1)
*CD-ROMs written in MODE2_FORM2 cannot
be read.
• The file name can be changed using 8
alphameric characters (space's cannot be
used).
CAUTION
Do not turn the power or ignition switch off
while reading. Interrupting reading process
might corrupt the data.
How to operate the AREA SHOT function (U.S.A. and CANADA only)
User creation
Automatic creation
File extension
Automatic creation
File extension
Changing the AREA SHOT
mode
Press the [MUTE] button for more
1
than one second.
Guidance maps, intersection street
names and turning directions are
displayed on the screen. Pressing and
holding the [MUTE] button (for 1
second or more) a second time closes
the Area Shot mode.
ATTENTION
• Pressing any button other than [
[DISP] and [RTN] displays the audio control
screen enabling audio system operation. If
no button is pressed within 6 seconds, the
guidance screen returns.
• If the audio control screen is displayed
while the Area Shot mode is ON, pressing
the [RTN], [ ], [
displays the guidance screen.
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.
], [ ],
] or [DISP] buttons
45
IX