Maintenance; The Importance Of Maintenance; Safety Precautions; Maintenance Schedule - Honda HRX537HYE Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45

MAINTENANCE

THE IMPORTANCE OF MAINTENANCE

Good maintenance is essential for safe, economical, and trouble-free
operation. It will also help reduce air pollution.
To help you properly care for your mower, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult, or require special tools, are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your mower under unusual conditions, consult an
authorized Honda dealer for recommendations applicable to your
individual needs and use.
Remember that your Honda dealer knows your mower best and is
fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, Honda
Genuine parts or their equivalents for repair and replacement.
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner's
manual.
Maintenance safety
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
owner's manual.

Safety Precautions

• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate the
engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around petrol. Use only a nonflammable solvent, not
petrol, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
WARNING
WARNING

MAINTENANCE SCHEDULE

Perform at every indicated month/year or operating hour interval,
whichever comes first.
Regular Service
Period
Before each use
Check: Grass catcher
Check: Cutting means
Check: Operation of the
Check: Engine oil level
Check: Air filter
Check: Rear shield
Check: Cutting-means bolts
First month
Change: Engine oil
or 5 hours
First 25 hours
Clean: Air filter
Adjust: Cutting-means control cable
Adjust: Drive clutch cable
Every 6 months
Change: Engine oil
or 50 hours
Clean: Air filter
Every year
6 month items above plus:
or 100 hours
Check-adjust: Spark plug
Clean: Spark arrester
Check: Operation of the
Grease: Pinion gears
Adjust: Throttle cable
Adjust: Drive clutch cable
Adjust: Cutting-means control cable
Adjust: Valve clearance
Adjust: Idle speed
Clean: Fuel tank
Every 2 years
Yearly items above plus:
or 150 hours
Replace: Air filter
Replace: Spark plug
Inspect-grease: Rear wheel adjuster
bushing
Every 2 years
Check: Fuel lines replace if
necessary
1. Service more frequently when used in dusty areas.
2. These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient. Refer to the Honda shop manual for service procedures.
3. In Europe and other countries where machinery directive
2006/42/EC is enforced, this cleaning should be done by your
servicing dealer.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
ENGLISH
Item
cutting-means control
1
2
1
1
3
(if equipped)
cutting-means control
2
2
2
2
2
2
2
2
Page
page 4
page 6
page 6
page 6
page 7
page 8
page 16
page 14
page 14
2
page 15
page 15
page 14
page 14
page 14
page 15
page 6
page 15
2
page 15
page 14
page 14
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hrx537hze

Tabla de contenido