Proper Use; Technical Data - EINHELL TE-BD 750 E Manual De Instrucciones

3. Proper use

This pillar drill is designed for drilling metal, plas-
tic, wood and similar materials. It is intended for
use in the private sector only.
Food and harmful materials may not be pro-
cessed with the machine. The drill chuck is only
designed for use with drill bits and tools with a
shaft diameter of 1,5 to 16 mm, and for cylindri-
cal tool shanks. Tools with a tapered shank can
also be used. The machine is intended for use by
adults only.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Nominal input voltage ............ 220-240V ~ 50 Hz
Nominal output ......................... 750 W S2 15 min
Motor speed ....................................... 1400 min
Output speed (infi nitely adjustable) .....................
......................................................450-2500 min
Drill chuck mount ........................................ B 16
Spindle taper .............................................. MK 2
Scroll chuck ...................................... Ø 1-16 mm
Reach .................................................... 160 mm
Dimensions of drill table ............... 243 x 243 mm
Angle adjustment of ............... table 45° / 0° / 45°
Drill depth ................................................. 80 mm
Pillar diameter .......................................... 65 mm
Height .................................................... 955 mm
Base area ..................................... 456 x 304 mm
Weight ........................................................ 43 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
Anl_TE_BD_750_E_SPK9.indb 24 Anl_TE_BD_750_E_SPK9.indb 24
GB
L sound pressure level ..................... 81.2 dB(A)
pA
K uncertainty ............................................. 2 dB
pA
L sound power level ....................... 90.3 dB(A)
WA
K uncertainty ............................................. 2 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 61029.
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for
initial assessment of a harmful eff ect.
Keep the noise emissions and vibrations to
a minimum.
-1
•
Only use appliances which are in perfect
working order.
-1
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever
necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is used.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
- 24 -
≤ 2.5 m/s
2
h
2
06.02.2018 10:25:31 06.02.2018 10:25:31