Benning MM 1 Instrucciones De Servicio página 14

Digital Multimeter for
- AC voltage measurement
- DC voltage measurement
- DC current measurement
- Resistance measurement
- Continuity testing
- Diode testing
Index of Contents
1. Operating instructions
2. Safety instructions
3. Scope of delivery
4. Meter description
5. General Specifications
6. Ambient Conditions
7. Electrical Specifications
8. Measuring with BENNING MM 1
9. Maintenance
10. How to use the protective rubber holster
11. Technical data of the measuring accessories
12. Environmental note
1. Operating Instructions
This operating manual is intended for
- electrical professionals
- qualified electrotechnical persons
The BENNING MM 1 is designed for measuring in dry conditions and must not
be used on electrical circuits with a rated voltage greater than 600 V AC or DC
(for details refer to "Ambient Conditions" section).
The following symbols appear in this manual and on the BENNING MM 1:

This symbol indicates dangerous voltage.

This symbol indicates warnings and cautions to be observed when
using the BENNING MM 1 (refer to manual!)
This
BENNING MM 1 has double insulation (Protection Class II)
This symbol appears on the display when the battery is low.
This symbol indicates the "Continuity testing" mode is selected.
This symbol indicates the "Diode testing" mode is selected.
The buzzer sounds for acoustic test results.
(DC) Direct voltage or current
(AC) Alternating voltage or current.
Ground (voltage against earth)
02/ 2011
Operating manual
BENNING MM 1
symbol on the
BENNING MM 1
BENNING MM 1

indicates that the
8