Get Started; Before Your First Treatment - Silk’n Jewel Manual Del Usuario

8. Get started

To use your Silk'n Jewel, follow these steps:
EN
1. Remove the device and other components from box.
2. Plug the adapter plug into the device socket and plug
the adapter into an electrical outlet. All energy level
indicator lights will turn on, and then go off.

8.1 Before your first treatment

C
Remove all jewellery before use.
You must decide which energy level is right for your skin, and the
area you want to treat. The device has 5 levels of energy from 1
(the lowest) to 5 (the highest). For example, you might treat one
area at energy level 1, and another at level 4. For information on
energy levels, refer to section 7.2 Energy levels.
To choose the right energy level, test each treatment area
separately (refer to the skin colour chart at the front of this
manual).
1. Press the control button to turn on the device. The
level 1 energy level indicator light will go on.
2. Place the treatment surface on your skin to deliver one
pulse. If you do not experience abnormal discomfort press
the control button again. This will increase the energy
level. Deliver one pulse on a different spot at energy level 2.
3. Continue testing at increased energy levels. Use the energy
levels indicated on the skin colour chart. When you find the
highest energy level that is comfortable for that treatment
area, you can start your treatment.
C
Use a lower energy level if you experience any discomfort.
18