Standard Accessories; Maintenance And Inspection - HIKOKI CH 45Y Instrucciones De Manejo

SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CH45Y/CH55Y/CH65Y: Hedge Trimmer
WARNING
– To reduce the risk of injury, user must read
instruction manual.
Remove plug from the mains immediately if
cable is damaged or cut.
Do not expose to rain.
Clutch system:
Protects blades and gears when debris or large
branches stop the blades
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
Rated voltage
Ensure that the power source to be utilized
V
conforms to the power requirements specifi ed
on the product nameplate.
L
Blade size
P
Power Input
n
No-load speed
0
φ
Maximum cutting branch diameter
max
Weight
(According to EPTA-Procedure 01/2003)
kg
Guaranteed Sound power level
1 1
Operating procedure
1 2
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
WARNING
Class II tool

STANDARD ACCESSORIES

In addition to the main unit, the package contains the
accessories listed in the table below.
○ Blade case ....................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○ Fine trimming hedges
○ Trimming and pruning garden trees
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 4.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
NAMES OF PARTS (Fig. 1 – Fig. 5)
Rear switch
1
Rear handle
2
Trigger switch
3
Front switch
4
Front handle
5
Protector
6
MOUNTING AND OPERATION
Action
Removing and inserting the blade
case
Attaching an extension cord
Switch ON
Switch OFF
Selecting accessories

MAINTENANCE AND INSPECTION

WARNING
○ Be sure to turn the tool off and the plug is disconnected
from the receptacle before making inspections or
carrying out maintenance.
○ Do not disassemble to blade. Failure to heed this
warning may result in injury.
○ Use gloves, or cloth to protect your hands when handling
the blade. Failure to heed this warning may result in
injury.
1. Cleaning and lubricating the cutting blade
After use, remove contamination, remains of blades etc.
(e.g. with a brush or cloth)
And then, carefully lubricate the blade with oil for
rust-proofi ng. When lubricate the blade, always use
genuine HiKOKI oil (code No. 371303) or spray (code
No. 371304) with the number specifi ed in the selecting
accessories.
7
English
Blade case
7
Blade
8
Name plate
9
Cord holder
0
Extension cord
!
(sold separately)
Figure Page
2 2
3 2
4 2
5 3
― 128