Colour Spotlight; Programs Running Automatically; Music Control; Synchronous Control Of Several - IMG STAGELINE RGBL-412DMX Manual De Instrucciones

7) For further adjustments start with step 1.
GB
If no button has been pressed for a few seconds,
the display will be extinguished. It will light up again
the next time a button is pressed.

6.2 Colour spotlight

For constant radiation of one colour by the light
effect panel, nine preset colours and a colour
adjustable individually are available:
1) Press the button MENU / ESC repeatedly until
the indication on the display does not change
any more.
2) Press the button UP or DOWN repeatedly until
the display shows
3) Press the button ENTER. The last colour
selected is activated:
...
= individual colour adjustment
Select the desired colour with the button UP or
DOWN.
4) To adjust an individual colour, select the menu
item and press the button ENTER. The dis-
play shows the last colour adjusted:
= red
= green
= blue
= white
5) Select the colour with the button DOWN or UP
and press the button ENTER. The display now
shows the letter for the colour ( , ,
the corresponding brightness value (000 ... 255).
6) Adjust the desired brightness with the button UP
or DOWN.
7) The menu item is exited with the button MENU/
ESC. Now the next colour can be selected and
adjusted.
12
.
= preset colour

6.3 Programs running automatically

Three different programs can be selected via the
menu item
= colour change 1 (slow)
= colour change 2 (fast)
= different running light effects
The running speed can be changed in nine steps
( ...

6.4 Music control

In case of music control, the LEDs light up by the
sound picked up via the microphone (10). Three
programs (
1) Activate the desired program via the menu item
.
2) Adjust the control SENSITIVITY (11) for the
microphone sensitivity so that the LEDs are
controlled by the music in an optimum way. The
further the control is turned up, the more sensi-
tive the response of the music control.
Note: When changing the volume at the music system, also
the sensitivity of the microphone must be adapted accord-
ingly with the rotary control.

6.5 Synchronous control of several

RGBL-412DMX (master-slave mode)

Several RGBL-412DMX can be interconnected.
Then the master unit can control all slave units in
sync.
1) Interconnect the units to a chain via the DMX
or ) and
connections. For this purpose see chapter 6.6.1
"DMX connection", however, skip step 1.
2) The first unit of the chain [whose input DMX IN
(6) is not connected] serves as a master unit
and controls the slave units. Adjust the slave
units to the slave mode:
a) Press the button MENU/ ESC repeatedly
until the indication on the display does not
change any more.
b) Press the button UP or DOWN repeatedly
until the display shows
c) Press the button ENTER. The display is
switched to
:
).
, , ) can be selected:
.
.