Accessories; Technical Data - Hilti PRI 2 Manual De Instrucciones

The tool switches itself off if leveling is unsuccessful
(when the tool is set up outside its self-levelling range or
movement is blocked mechanically).
The tool switches itself off when knocked off level (vibra-
tion / impact).
When the tool has switched itself off, rotation stops and
all LEDs blink.
en
2.10 Increasing the visibility of the laser beam
Depending on the working distance and ambient light,
visibility of the laser beam may be impaired.
The PRA 50/ 51 target plate and/or the PUA 60 laser
visibility glasses can be used to improve laser beam
visibility.
When laser beam visibility is reduced due to bright sun-
shine, for example, we recommend use of the PRA 22
laser receiver (accessory).

3 Accessories

Designation
Receiver
Target plate
Laser receiver holder
Wall mount
Battery charger
Battery
Various tripods
Measuring staff
Laser visibility glasses

4 Technical data

Right of technical changes reserved.
NOTE
Right of technical changes reserved.
Range of remote control unit (circle diameter)
Range of laser receiver (circle diameter)
Accuracy
Laser class: Class 3R, visible
Laser class: class IIIa
12
2.11 Items supplied with the PRI 2 rotating laser
1 PRI 2 rotating laser
1 PRA 2 remote control unit
1 PRA 50/ 51 target plate
1 Operating instructions
1 Manufacturer's certificate
4 Batteries
1 Hilti toolbox
2.12 Items supplied with the PRI 2 / PRA 22
rotating laser with laser receiver
1 PRI 2 rotating laser
1 PRA 2 remote control unit
1 PRA 22 laser receiver
1 PRA 50/ 51 target plate
2 Operating instructions
2 Manufacturer's certificates
5 Batteries
1 Hilti toolbox
Short designation
PRA 22
PRA 50/ 51
PRA 77
PRA 70/71
PUA 80
PRA 82
All Hilti tripods are equipped with a ⁵₈" thread
All Hilti measuring staffs
PUA 60
1...60 m (3 ‑ 200 ft)
With laser receiver: 2...300 m (6 ‑ 1000 ft)
Temperature +24°C (75°F), Horizontal distance 10 m
(60 ft): 1 mm (³/₃₂")
635 nm (< 3mW Class 60825-1:2003)
635 nm (<3mW 21 CFR FDA § 1040:2006)