Information Displayed During Operation; Accessories - Hilti PM 2-L Manual De Instrucciones

2.4 Information displayed during operation

LED
Laser beam

3 Accessories

Designation
Tripod
Target plate
Target plate
Laser receiver
Telescopic brace
Universal adapter
Laser visibility glasses
All manuals and user guides at all-guides.com
The LED does not light.
The LED does not light.
The LED does not light.
The LED lights constantly.
The LED blinks twice every
10 seconds (pendulum not
locked) or every 2 seconds
(pendulum locked).
The LED blinks.
The laser beam blinks twice
every 10 seconds (pendu-
lum not locked) or every 2
seconds (pendulum locked).
The laser beam blinks five
times and then remains per-
manently on.
The laser beam blinks rapidly.
The laser beam blinks every 2
seconds.
Short designation
PMA 20
PMA 54/55
PRA 50/51
PMA 31
PUA 10
PMA 78
PUA 60
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
The laser beam is switched on. The tool
is in operation.
The batteries are almost exhausted.
The tool is switched off but the pendu-
lum is not locked.
The batteries are almost exhausted.
Automatic power-off has been deactiv-
ated.
The tool is unable to level itself (Outside
the self-leveling range).
Inclined line operating mode. The pen-
dulum is locked, as a result of which the
lines are not leveled.
Description
The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with the PM 2-L laser
tool. Do not wear the laser visibility
glasses while driving a vehicle on a
public road.
en
13