Led Indicators; Accessories - Hilti PRI 36 Manual De Instrucciones

1 AC adapter
1 Hilti toolbox
2.11 Operating status indicators
Operating status is indicated as follows: auto-leveling LED, battery status LED, shock warning LED and slope LED.

2.12 LED indicators

en
Auto-leveling LED (green)
Shock warning LED (orange)
Surveillance LED (orange)
Slope LED (orange)
All LEDs
2.13 Charge status of the Li‑ion battery during operation
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
2.14 Charge status of the Li‑ion battery during charging while inserted in the tool
LEDs light constantly
LED 1, 2, 3, 4
LED 1, 2, 3
LED 1, 2
LED 1
-
2.15 Charge status of the Li‑ion battery during charging while not inserted in the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn't light, the battery is fully charged.

3 Accessories

Designation
Remote control / laser receiver
Laser receiver
Target plate
Receiver holder
Wall mount
20
All manuals and user guides at all-guides.com
The green LED blinks.
The green LED lights con-
stantly.
The orange LED lights con-
stantly.
The LED lights orange.
The orange LED lights con-
stantly.
All LEDs blink
LEDs blink
-
-
-
-
LED 1
LEDs blink
-
LED 4
LED 3
LED 2
LED 1
Description
PRA 36
PRA 38
PRA 54
PRA 80
PRA 70/71
The tool is in the leveling phase.
The tool has leveled itself / is operating
normally.
Shock warning mode is deactivated.
The tool is in surveillance mode.
Slope mode is active.
The tool has been bumped, knocked off
level or is exhibiting some other error.
Charge status C
C ≧ 75 %
50 % ≦ C < 75 %
25 % ≦ C < 50 %
10 % ≦ C < 25 %
C < 10 %
Charge status C
C = 100 %
C ≧75%
50 % ≦ C < 75 %
25 % ≦ C < 50 %
C < 25 %