Information Displayed During Operation; Accessories; Technical Data - Hilti PMP 45 Manual De Instrucciones

2.3 Information displayed during operation

LED
en
Laser beam
2.4 Items supplied with the point laser (cardboard box version)
1 PMP 45 point laser
1 Soft pouch
4 Batteries
1 Operating instructions
1 Manufacturer's certificate

3 Accessories

Designation
Tripod
Target plate
Magnetic holder
Telescopic brace
Frame clamp
Universal adapter
Hilti toolbox
Laser visibility glasses

4 Technical data

Right of technical changes reserved.
Range of the points
Accuracy 1
Self-leveling time
1 Influences such as particularly high temperature fluctuations, dampness, shock, dropping, etc. can affect accuracy. Unless stated
otherwise, the tool was adjusted or calibrated under standard ambient conditions (MIL-STD-810F).
12
The LED doesn't light.
The LED doesn't light.
The LED doesn't light.
The LED lights constantly.
The LED blinks twice every
10 seconds.
The laser beam blinks twice
every 10 seconds.
The laser beam blinks rapidly.
Short designation
PMA 20
PMA 54/55
PMA 74
PUA 10
PMA 25
PMA 78
PMA 62
PUA 60
30 m (98 ft)
±2 mm at 10 m (±0.08 in at 33 ft)
3 s (typical)
The tool is switched off.
The batteries are exhausted.
The batteries are inserted incorrectly.
The laser beam is switched on. The tool
is in operation.
The batteries are almost exhausted.
The batteries are almost exhausted.
The tool cannot level itself.
Description
The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with this tool. Do not
wear the laser visibility glasses while
driving a vehicle on a public road.