Additional Functions - IMG STAGELINE BEAM-40/RGBW Manual De Instrucciones

4.3 Additional functions

Menu
Functions with the setting . .
item
Opposite pan direction of moving head
Opposite tilt direction of moving head
Display mode for upside-down installation
(rotated by180°)
Reset to factory settings (bold in fig . 3)
Press button ENTER:
Reset – The head will go to its starting
position
Fig. 6 Additional functions
1) Go to the corresponding menu item and
select the function with the button MENU
(also see fig . 3) .
2) Go to . . with the button UP or DOWN
(not necessary and not possible for reset) .
3) To activate the setting, press the button
ENTER .
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®
5 Specifications
Data protocol: . . . . . . . . . . . DMX 512
Number of DMX channels
BEAM-40 / RGBW: . . . . . . . 11 or 13
BEAM-40 / WS: . . . . . . . . . 7 or 9
Light source
BEAM-40 / RGBW: . . . . . . . 1 × RGBW LED
BEAM-40 / WS: . . . . . . . . . 1 × LED, white
Power consumption: . . . . . 10 W
Beam angle: . . . . . . . . . . . 5°
Pan angle: . . . . . . . . . . . . . . 540°
Tilt angle: . . . . . . . . . . . . . . 270°
DMX connections: . . . . . . . XLR, 3 poles
Pin configuration: . . . . . . . Pin 1 = ground
Power supply: . . . . . . . . . . . 230 V/ 50 Hz
Power consumption: . . . . . . 40 VA max .
Dimensions (W × H × D): . . . 13 × 20 × 13 cm
Weight: . . . . . . . . . . . . . . . 2 .8 kg
Subject to technical modification .
Pin 2 = DMX−
Pin 3 = DMX+
11