Restore Factory Settings - mundoclima AEROTHERM MAM-V9 Serie Manual De Usuario E Instalacion

Monobloc
Ocultar thumbs Ver también para AEROTHERM MAM-V9 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When the cursor is on T4_AHS_ON、dT1_AHS_ON、
dT1_AHS_OFF or t_AHS_DELAY, Use
scroll and adjust the parameter.
When the cursor is on T4_AHS_ON、dT1_AHS_ON、
dT1_AHS_OFF or t_AHS_DELAY, Use
scroll and adjust the parameter.
T4_AHS_ON is the ambient temperature for starting the
additional heating source. When the ambient temperature
rises above T4_AHS_ON, the additional heating source
will be unavailable. The relationship between the
operation of additional heating source and ambient
temperature is shown in the picture below:
Heat mode
Heat mode by
Heat mode
by AHS
heat pump and
by heat
only
AHS
pump
T4HMIN
T4_AHS_ON
dT1_AHS_ON is the temperature difference between T1S
and T1B for turning the additional heating source on(only
when T1B<T1S-dT1_AHS _ON will the unit turn on),
dT1_AHS_OFF is the temperature difference between
T1S and T1B for turning the additional heating source off
(when T1B•T1S+dT1_AHS_OFF the additional heating
source will turn off), t_AHS_DELAY is the time that the
compressor has run before starting the additional heating
source. It should be shorter than the additional heating
source start time interval.The operation of the heat pump
and the additional heating source is shown below:
T1s-T1B
T4<T4_AHS_ON
dT1_AHS
_ON
dT1_AHS
_OFF
ON
OFF
AHS
ON
Compressor
OFF
t_AHS_delay
If solar energy kit is installed, please select YES at "7.3
SOLAR ENERGY", then the solar pump will operate when
the solar energy kit operating for domestic hot water
heating, and the heat pump will stop operating for
domestic hot water heating.
10.7.8 HOLIDAY AWAY SETTING
About HOLIDAY AWAY SETTING
The HOLIDAY AWAY SETTING is used to set the outlet
water temperature to prevent freezing when away for
holiday.
How to enter the HOLIDAY AWAY SETTING
To enter the HOLIDAY AWAY SETTING, go to MENU>
FOR S ERVICEMAN> HOLIDAY AWAY SETTING. Press
OK. The following page is displayed:
and
to
and
to
When the cursor is on T1S_H.A._H or T5S_H.M_DHW,
Use
T1S_H.A._H is the target outlet water temperature for
OFF
space
T4
T5S_H.M_DHW is the target outlet water temperature for
domestic hot water heating when in holiday away mode.
T4HMAX
10.7.9 SERVICE CALL SETTING
About SERVICE CALL
The installers can set the phone number of the local
dealer in SERVICE CALL. If the unit doesn't work
properly, call this number for help.
How to set the SERVICE CALL
To set the SERVICE CALL, go to MENU> FOR
SERVICEMAN>SERVICE
following page is displayed:
ON
OFF
Time
t_AHS_delay
Use
maximum length of the phone number is 13 digits, if the
length of phone number is short than 12, please input ,
as shown below:
The number displayed on the user interface is the phone
number of your local dealer.

10.7.10 RESTORE FACTORY SETTINGS

About RESTORE FACTORY SETTINGS
The RESTORE FACTORY SETTING is used to restore
all the parameters set in the user interface to the factory
setting.
152
8 HOLIDAY AWAY SETTING
T1S_H.A_H
T5S_H.M_DHW
SCROLL
and
to scroll and adjust the parameter,
heating
when
in
holiday
CALL.
Press
9 SERVICE CALL
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
OK
CONFIRM
ADJUST
SCROLL
to scroll and set the phone number. The
9 SERVICE CALL
PHONE NO. ****************
MOBILE NO. ****************
OK
CONFIRM
ADJUST
SCROLL
20°C
15°C
away
mode.
OK.
The

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido