Preparing The Motor Handpiece For Use; Connecting The Power Cord; Connecting The Battery - Dentsply Maillefer X-Smart Easy Manual De Usuario

E. PREPARING THE MOTOR HANDPIECE FOR USE

1. Connecting the Power Cord

Securely insert the AC power cord into the
charging stand. Securely insert the AC
power cord into a wall receptacle.

2. Connecting the Battery

1. Remove the plug.
2. Unscrew the battery cover. Lift the battery cover off the back of the handpiece.
3. Remove the battery from the plastic bag.
4. Insert the battery connector into the receptacle inside the battery chamber and
place the battery into the chamber with care so as not to catch the cord.
PRECAUTION
• In case of difficulty inserting the connector into the motor handpiece, make sure the connector
is properly oriented. Do not insert it by force.
5. Close the battery cover and replace the screw and plug. Ensure you charge the
battery before use.
12
Plug
Fig. 4
Fig. 6
Fig. 3
Screw
Lift here
to remove
battery door
Fig. 5