Battery Indicator; Preparatory Operations - Dentsply Maillefer X-Smart Easy Manual De Usuario

AUTO REVERSE
The auto reverse mode can be selected. (See Auto Reverse Function, section 5.)
The default mode for auto reverse is ON. The last position used for auto reverse (on
or off) is what will be the new default until the user manually changes it. Only the
mode that is currently in use will be displayed.
Display

BATTERY INDICATOR

The mark of the present remaining amount of the battery is displayed when the
handpiece is turned on.
Display
• Charging indicator
This lamp will be green when the battery has a full charge and yellow when the
battery is charging.

3. Preparatory Operations

• Charge the battery (See "Charging the Battery" on page 13).
• Press any button to turn the unit on.
• Select Torque – press the SELECT button until the torque box is highlighted with
a double-line. Use the (+) and (-) buttons to adjust to the desired torque level.
• Select Speed Control – press the SELECT button until the speed is highlighted,
use the (+) and (-) buttons to adjust to the desired speed level.
16
ON If, during operation, the load reaches the
torque limit, the unit auto-reverses. If the
load is removed after auto reverse rotation,
it stops. See Auto Reverse Function, section 5.
OFF Auto reverse rotation is not activated.
Full charge
Approximately 30-80% remains
Less than 30% remains.
Battery is drained. Charge the battery.