Imetec ZeroCalc PRO PS2 2200 Instrucciones De Uso página 21

Only a little steam
or none at all is
dispensed.
The impurities that
come out
from the steam holes
stain the garments.
Water leaks from the
plate.
The packaging of the appliance is made of recyclable materials. Dispose of the packaging in
accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), the
crossed bin symbol on the appliance or its packaging indicates that the appliance must be
disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical and
electronic equipment. Alternatively, instead of handling the disposal, the user can hand over
the appliance to the retailer when a new, equivalent one is purchased. The user can hand over
electronic products measuring less than 25 cm to retailers of electronic products having a sales area
of at least 400 m free of charge and with no obligation to buy. Appropriate separate collection for the
2
subsequent procedure for the decommissioned appliance for recycling, which includes treatment and
environmentally friendly disposal helps prevent adverse effects on the environment and health and
promotes reusing and/or recycling materials that the appliance consists of.
There is not enough water in
the reservoir (6).
The anti-scale filter (18) is no
longer effective.
The anti-scale filter (18) is not
inserted correctly.
Chemical additives, scented
liquids or descaling agents are
being used.
Starch is being used.
Plate temperature (16) too
low due to pressing the
steam request button (17) too
frequently.
The temperature adjustment
knob (13) is set to a
temperature that is too low.
The steam adjustment knob
(10) is not positioned on the
setting matching the one
selected with the temperature
adjustment knob (13).
DISPOSAL
Fill the reservoir (6).
When the anti-scale filter (18) is no
longer effective, the electronic system
modifies steam emission to safeguard the
lifespan of the product.
Check that the filter change LED (8)
and the acoustic signal are ON and
then replace the filter as indicated in the
specific paragraph.
Cross-check the anti-scale filter insertion
process as indicated in the specific
paragraph.
These substances damage the product:
do not add additives to the water in the
reservoir.
Always spray the starch on the reverse
side of the fabric.
Allow slightly longer intervals between
the jets of steam.
Turn the temperature adjustment knob
(13) into a position from 2 dots upwards.
Turn the steam control knob (10) to the
setting matching the one selected with
the temperature adjustment knob (13).
EN
18