Dangers Due To Electrical Power; Commissioning; Safety Information; Delivery Scope And Transport Inspection - CASO DESIGN EMGS 25 Manual Del Usuario

12.3.5
Mortal danger exists when coming into contact with live
wires or subassemblies!
Observe the following safety notices to avoid dangers due to
electrical power:
► Do not operate this device if it has a damaged cable or plug,
if it is not working properly or if it has been damaged or
dropped. If the power cable or plug are damaged, then they
must be replaced by the manufacturer or its service agent in
order to avoid a hazard.
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the
device can also occur.
► Ensure that the device is switched off before replacing the
lamp to prevent the risk of electric shock.

13 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

13.1 Safety information

► Packaging materials may not be used for playing. There is a danger of suffocation.
► Transport, unpack and use two persons to set down the device because of the heavy
weight of the device.

13.2 Delivery scope and transport inspection

As a rule, the EMGS 25 microwave is delivered with the following components:
 EMGS 25 microwave
 rolling ring

Dangers due to electrical power

Mortal danger due to electrical power!
Warning
 glass turntable
 grill rack
55