Other Functions; Adjusting The Sound Characteristics; Attenuating The Sound; Changing The Sound And Display Settings - Sony XR-C2600 Manual De Instrucciones

Ocultar thumbs Ver también para XR-C2600:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Other Functions

Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of (SEEK/AMS).
Adjust within three seconds after selecting
the item.

Attenuating the sound

When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases
the volume automatically when a telephone
call comes in (Telephone ATT function).
Changing the sound and
display settings
The following items can be set:
•CLOCK (page 7).
•BEEP – to turn the beep sound on or off.
•A.SCRL (Auto Scroll)* (page 13).
•D.INFO (Dual Information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•M.DSPL – to turn the Motion Display on or
off.
1
Press (MENU).
2
Press either side of (PRST/DISC)
repeatedly until the desired item
appears.
Each time you press (–) side of
(PRST/DISC), the item changes as follows:
CLOCK t BEEP t A.SCRL* t D.INFO t
M.DSPL
* When the radio is off, or when no tape, CD,
or MD is playing, this item will not appear.
3
Press (+) side of (SEEK/AMS) to select the
desired setting (Example: ON or OFF).
4
Press (ENTER).
After the mode setting is complete, the
display returns to normal playback mode.
11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido