NovoPress ACO203 Instrucciones De Uso página 25

CAUTION!
Keep fingers away from the at-risk zone if no press jaw/adaptor jaw is
fitted. (Fig. 4)
Fingers risk being crushed.
Therefore:
–
–
Pos : 64 /RVT/Inbetri ebnahme und Betrieb/Ger ät vorberei ten/3 - Info-H altebolzen ACO/EC O202, ECO301, AC O/ECO203 @ 0\mod_1382617008258_18.doc x @ 1559 @ @ 1
Information!
The device will not start if the retaining pin (8) is incorrectly inserted. The green LED
flashes.
Pos : 65 /RVT/Inbetri ebnahme und Betrieb/Ver press en/04- BA beachten ACO102, ACO152, AC O/ECO202, AC O202XL, ECO301, AFP/EF P202 @ 0\mod_1386254189959_18.doc x @ 1665 @ @ 1
Information!
Always comply with the operating instructions for the press tools!
Pos : 66 /RVT/Inbetri ebnahme und Betrieb/Ver press en/05b - Punkt 1 +2 AC O/ECO202, AF P/EFP202 @ 0\mod_1386330889477_18.doc x @ 1686 @ @ 1
1. Check whether the nominal width of the press fitting matches the nominal width of the press
jaw/press collar.
2. Comply with the system manufacturer's instructions when fitting the press jaw/press collar
(Fig. 8).
If using a press collar: Fit the adaptor jaw to the press collar as described in the press collar
manufacturer's instructions.
Pos : 67 /RVT/Inbetri ebnahme und Betrieb/Ver press en/07 - Info Pr ess bac ke AC O102, ACO152, AC O/ECO202, AFP/EF P202 @ 0\mod_1386668397015_18.doc x @ 1700 @ @ 1
Information!
Make sure that the press jaw is fully closed when pressing is complete (Fig. 9).
Pos : 68 /RVT/Inbetri ebnahme und Betrieb/Ver press en/08 - Info Pr esss chling e ACO/EC O202, ACO202XL, EC O301, AF P/EFP202 @ 0\mod_1386668854154_18.doc x @ 1706 @ @ 1
Information!
Ensure there is no gap between the segments of the press collar when the
pressing operation is complete.
Pos : 69 /RVT/Inbetri ebnahme und Betrieb/Ver press en/13d - Info Start-T aster 2mal drüc ken- nur ACO203 BT , AC O203XL BT @ 5\mod_1518439239356_18.doc x @ 34652 @ @ 1
Information! (only ACO203 BT with wireless interface)
If the press device is switched off, briefly press the start button (1) to activate the
press device. Press the start button again to start the pressing operation.
Pos : 70 /RVT/Inbetri ebnahme und Betrieb/Ver press en/09a - Punkt 3 AC O102, AC O152, ACO/ECO202, ACO202XL, AF P/EF P202 @ 0\mod_1386672196372_18.doc x @ 1712 @ @ 1
3. To start the process, press the start button.
Pos : 71 /RVT/Inbetri ebnahme und Betrieb/Ver press en/10b - Punkt 4 AC O/ECO202, AF P/EF P202 @ 0\mod_1386673960873_18.doc x @ 1724 @ @ 1
4. When pressing is complete:
• If using a press collar: First detach the adaptor jaw from the press collar, then
• Detach the press jaw/press collar from the press fitting (Fig. 10).
Pos : 72 /RVT/Allgemeines /#### Seitenumbr uch #### @ 0\mod_1380200837280_0.doc x @ 885 @ @ 1
Do not operate the device without the jaws.
Keep your fingers away from the at-risk zone.
ACO203 / ACO203 BT / ECO203
21
EN