7. Repeat this step twice for best results.
8. Screw the plug back in and then place the cap on. (Fig 3 and 2)
CHANGE ANTI-SCALE CARTRIDGE
Replacing the water softening cartridge
Replace the water softening cartridge regularly. At moderate use (twice a week) and depending on
the water hardness in
replaced every
3-6 months.
NOTE:
- Do not use the unit without the water softening cartridge!
1- Remove the water tank by pressing the clamp and pulling the tank
2- Lift the ring on the cartridge
NOTE:
- Be careful - there can be water inside the cartridge body
Also water can remain at the installation place of cartridge. Remove the remaining water from the
installation place with a dry cloth or paper tissue before installing a new cartridge.
1-Install a new water softening
2-Install the water tank
your region,the
water softening anti-scale cartridge should be
body, pull it upwards and remove the cartridge.
cartridge to its
place
21