Short Term Storage - WAGNER CONTROL PRO 130 POWER TANK Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SHORT TERM STORAGE

This procedure should be used when taking a short term break or
i
when ending your project for the day. If your break is longer than 16
hours follow Cleanup instructions, pages 14-15.
YOU WILL NEED
Water
Plastic bag
Damp rags
Stir stick
Instructions are for latex materials only! If using oil
i
based material follow instructions for Cleanup on
pages 14-15.
SHUTDOWN
1.
Perform the Pressure Relief Procedure, page 7.
2.
Turn spray tip 90º. This will prevent air from drying out any spray
material that may be inside the spray tip. Wrap spray tip and guard
in a damp rag and then place entire spray gun in plastic bag.
3.
Pour 1/2 cup water slowly on the top of the paint to prevent the
paint from drying. Replace the hopper lid.
Place the entire spraying system out of the sun.
STARTUP
4.
Remove the spray gun from the plastic bag. Turn the spray tip back
to the spraying position.
5.
If water was added during shut down, stir water into material with
the stir stick.
6.
Follow Spraying instructions, page 9.
5
1
PAGE 7
2
3
4
6
PAGE 9
EN
k
AND
AND
13

Publicidad

Tabla de contenido
loading

Tabla de contenido