General Power Tool Safety Warnings - Makita UH420D Manual De Instrucciones

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Switch trigger A
5. Switch trigger B
6. Lock-off button
7. Indication lamp
8. Cutting height
9. 10 cm
10. Trimming direction
11. Hedge surface to be trimmed
SPECIFICATIONS
Model
Blade length
Strokes per minute (min
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
....... Read instruction manual.
..................... Do not expose to moisture.
Ni-MH
............... Only for EU countries
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that
6
Explanation of general view
12. Tilt the blades
13. String
14. Press
15. Chip receiver
16. Nut
17. Shear blade
18. Hooks
19. Fit the hooks into groove
20. Grooves
21. Press the levers on both sides
22. Unlock the hooks
UH420D
420 mm
-1
)
823 mm
2.9 kg
D.C.14.4V
D.C.14.4 V Model
D.C.18 V Model
END013-5
23. Screws
24. Under cover
25. Sponge
26. Washer
27. Gear
28. Sleeves
29. Groove
30. Blade cover
31. Grease
32. Blade
UH480D UH482D
480 mm 480 mm
1,350
873 mm 879 mm
3.0 kg 3.0 kg
D.C.18V
BL1413G/BL1415G
BL1813G/BL1815G
Intended use
The tool is intended for trimming hedges.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
UH520D
520 mm
923 mm
3.0 kg
D.C.14.4V
DC18WA
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
UH522D
520 mm
929 mm
3.1 kg
D.C.18V
ENE014-1
GEA010-1