Footplate Height - Leckey Mygo Instrucciones De Usuario

10.10 Footplate
height
To set the height of the footplate loosen the
bolt (A) on the front of the calf support tube
and slide the footplate to the required height
and retighten the bolt.
To set the correct height of the footplate
measure the distance from the back of the
child's knee to the bottom of their heel.
You may have to adjust the angle to achieve
the required foot position. To adjust the
angle loosen the bolt (B) with the multi-tool,
set to the desired angle and retighten.
There is a safety popper to indicate
maximum safe extension. This can be set
with the child in the seat.
B
Always check the footplate is secure to
prevent the user sliding forward and
down in the seat which could pose
a choking hazard if a chest or trunk
harness is attached.
A