Leckey Mygo Instrucciones De Usuario página 63

11.3 Chassis
The Mygo Seat is designed to fit onto a
range of chassis. This user manual shows
the correct and safe use of the seating
system with the Leckey Hi-low chassis. For
all other chassis or bases please refer to the
manufacturer's handbook.
To prepare the Hi-low chassis for the seating
system we recommend that you raise the
chassis to a comfortable working height
by pressing the foot lever at the rear of the
chassis or by pressing the up button on the
handset of the powered option.
11.4 Powered height
adjustment
The powered chassis can be easily adjusted
with the push button control handset. The
seat can be height adjusted with the client in
the chair. Before the product is used for the
first time it is recommended that the battery
should be fully charged for 12 hours. To do
this plug the adaptor into the mains socket
and attach the lead (A) to the battery and
switch on the mains supply power. When
charged switch off mains power, remove
the adaptor plug and disconnect the lead
from the battery. The battery charge should
be topped up each day for approximately
one hour. The chair can be adjusted in
height while connected to the mains.
A