Leckey Mygo Instrucciones De Usuario página 64

11.5 Height
Adjustment – Hi-low
chassis
You can carry out this adjustment with the
child in the chair. To adjust the height of the
Hi-low chassis press the foot lever at the
rear of the chassis or press the up button on
the handset of the powered option whilst
holding the push handle. Once you remove
your foot from the pedal or your thumb from
the handset the seat will be fixed at the
chosen height.
For safety the height adjustment pedal on
the chassis can be locked by engaging the
pull pin (C) on the right hand side of the
pedal. To unlock pull the pin out and rotate
90 degrees, the pedal can then be operated.
The locking pin (C) should be kept in the
locked position when you are not adjusting
the chassis.
Always keep the locking pin engaged
when you are not adjusting the chassis.
This will prevent the foot pedal being
operated accidentally.
For children over the weight of 27kg
(60lbs), raising the manual chassis is
a 2 person lift (UK lifting and handling
regulations).
Always use caution as hands could
become trapped when height adjusting
the base.
c