Leckey Mygo Instrucciones De Usuario página 65

11.6 Tilt in space
The tilt in space can be angled while the
user is in the seat. Before you adjust the tilt
in space angle of the seat always ensure the
pelvic harness is secured preventing the user
from sliding forward in the seat.
To adjust the tilt angle press the lever under
the seat base. Once you have selected the
angle you require, by simply removing your
hand from the lever, the chair will be locked
in position. The tilt in space should be
locked off while the user is in the seat. To
lock the lever twist the pull pin to the right
hand side of the lever and the pin will pop
into position. You may have to lift the lever
slightly to allow it to lock. To unlock pull the
pin out and rotate 90 degrees, the lever can
then be operated.
Lever
Always keep the tilt in space lever
in the locked position to prevent
accidental actuation of the lever which
could cause the seat unit to jolt and
possibly cause injury to the child.
Please use handle bars when operating
tilt in space.
Always check with your therapist that
the use of tilt in space will not cause
any obstructions to the child's airways.
Locking pin