Desoutter SSB060-T750-S4Q Instrucciones De Uso página 2

Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
ENGLISH
You have high standards and expect to purchase quality goods –
quality offered by CP.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an Electric Power Tool from CP was the right choice!
Bit reception . . . . . . . . . . . . . . . . . . .
Torque . . . . . . . . . . . . . . . . . . . . . . .
No-load speed . . . . . . . . . . . . . . . . .
Battery voltage . . . . . . . . . . . . . . . . . .
Weight without battery
J Please pay attention to the safety instructions in the attached leaflet!
J Do not dispose of used battery packs in the household refuse or by burning them.
J Do not store the battery pack together with metal objects (short circuit risk).
J Use only CP recommended chargers for charging CP battery packs. Do not use
battery packs from other systems.
J No metal parts must be allowed to enter the battery section of the charger (short
circuit risk).
J Never break open battery packs and chargers and store only in dry rooms.
Keep dry at all times.
J Do not let any metal parts reach the airing slots – danger of short circuit!
Typically the A-weighted sound pressure level of the tool is 70 dB (A).
Wear ear protectors! Measured values determined according to EN 50 260.
Typically the hand-arm vibration is below 2.5 m/s
Measured values determined according to EN 50 260.
These declared values were obtained by laboratory type testing in compliance with
the stated standards and are not adequate for use in risk assessments. Values
measured in individual work places may be higher than the declared values. The
actual exposure values and risk of harm experienced by an individual user are
unique and depend upon the way the user works, the work piece and the workstation
design, as well as upon the exposure time and the physical condition of the user.
We, Desoutter Ltd., cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk
assessment in a work place situation over which we have no control.
The battery screwdriver is designed for screwdriving for independent use away from
mains supply.
Do not use this product in another way as stated for normal use.
For professional use only.
1
SSB060–T750–S4Q
1/4" . . . . . . . . . . . . . .
1,5–6 Nm
–1
750 min
12 V . . . . . . . . . . . . . . .
. . . . . . . . . . 1,32 kg
SSB060–T750–S4Q, SSB120–T360–S4Q
SSB120–T360–S4Q
1/4"
. . . . . . . . . . 5–12 Nm
. . . . . . . . . . 360 min
12 V
. . . . . . . . . . . . 1,32 kg
2
.
–1