COANDA AIRFLOW
In cool or dry mode, vertical airfl ow louvre
is set obliquely upward to deliver cool air
to the ceiling in order to avoid direct air-
fl ow. In heat mode, vertical airfl ow louvre
is set downward to deliver the warm air
down to the fl oor.
1
During operation, press the COAN-
DA AIFLOW button.
(COOL / DRY mode)
• The remote control will display "
(HEAT mode)
• The remote control will display "
TO CANCEL
Press the COANDA AIFLOW button
again.
NOTE:
• If you want COANDA AIRFLOW operation in
FULL POWER mode, press COANDA AIR-
FLOW button during FULL POWER operation.
• The COANDA AIRFLOW setting and the
SPOT AIR setting can not be used together.
AY-XPC18LR_OM_ENG.indd 8
AY-XPC18LR_OM_ENG.indd 8
SPOT AIR
The louvres are adjusted so that air fl ow is
delivered to the desired area.
1
Press the SPOT AIR button to select
the desired air fl ow direction.
CANCEL
".
".
1
NOTE:
• If you want the SPOT AIR setting in the FULL
POWER mode, press the SPOT AIR button
during the FULL POWER operation.
• The COANDA AIRFLOW setting and the
SPOT AIR setting can not be used together.
GB-8
1
2010-03-18 16:45:46
2010-03-18 16:45:46