Graco Extend2Fit Manual De Instrucciones página 59

8. Tighten the Vehicle Seat Belt
Press down firmly in the center of the car
seat. Pull on the shoulder belt to tighten
while feeding the slack back in the retractor.
at
9. Attach The Tether
Extend the tether by pressing the grey
button and pulling out on the strap and
attach. Consult vehicle's owner manual
for specific location.
e
let it
und.
10. Tighten the Top Tether Strap
ld
Push the car seat back while tightening the
wner
top tether strap to remove all the slack.
continue next page
59