Graco Extend2Fit Manual De Instrucciones página 81

Locking Latchplate and ELR
Retractor
A latchplate that holds the lap belt snug
after it has been adjusted; contains a metal
bing
nd a bar on the underside of the hardware that
"locks" the belt in position.
seat
When installing the car seat, route the
in.
vehicle seat belt through the proper belt
out
path and buckle it in. Then, pull upwards
pull
on the shoulder belt so that the lap belt gets
ack
tight around the car seat.
Grab the sides of the seat at the belt path and
slide the seat side-to-side and front-to-back.
The
The seat should not move more than 1"
.
(2.5 cm).
81