Sony NSR-500 Serie Manual De Instalación página 35

When you want register the devices
with the information from the
automatic search as is, proceed to Step
5.
4
Configure each item.
Enter the administrator user name and
password.
It is possible to enter the setting values
individually, but the following shows
how to enter the same setting values
for multiple devices simultaneously.
1 Select the check boxes of the
devices for which you want to enter
setting values, and click the [Input
All] button.
The Input All dialog box appears.
2 Select the check boxes of the items
you want to enter, enter the
necessary information, and click
[OK].
User
Enter the user name for connecting
to the device. It can be up to 32
characters and consist of
alphanumeric characters and some
symbols (periods (.), hyphens (-),
underscores (_)).
Password
Enter the password for connecting
to the device. It can be up to 32
characters and consist of
alphanumeric characters and some
symbols (periods (.), hyphens (-),
underscores (_)).
IP Address
Enter the IP address for the device.
When registering multiple devices
simultaneously, IP addresses are
configured sequentially, starting
with the entered address.
Port No.
Enter the port number on the device
side for when connecting with the
device.
The default setting is "80."
The dialog box closes, and the
Multiple Camera Registration
dialog box reappears.
5
Select the check boxes of the devices
you want to register, and click the
[Register] button.
Step 3: Settings 35