Others; I/O Port - Sony NSR-500 Serie Manual De Instalación

Others

I/O Port

Pin Assignment of I/O Port
Sensor In
Pin NO. SENSOR IN
1 3.3 v
2 IN_8 –
3 IN_8
4 IN_7 –
5 IN_7 +
6 IN_6 –
7 IN_6 +
8 IN_5 –
9 IN_5 +
10 IN_4 –
11 IN_4 +
12 IN_3 –
13 IN_3 +
14 IN_2 –
15 IN_2 +
16 IN_1 –
17 IN_1 +
18 GND
Alarm Out
Pin NO. ALARM OUT
1 GND
2 OUT_8 –
3 OUT_8 +
4 OUT_7 –
5 OUT_7 +
6 OUT_6 –
7 OUT_6 +
8 OUT_5 –
9 OUT_5 +
10 OUT_4 –
11 OUT_4 +
12 OUT_3 –
13 OUT_3 +
14 OUT_2 –
15 OUT_2 +
16 OUT_1 –
17 OUT_1 +
18 GND
RS-422/485
Pin NO. RS-422
19 TX –
20 TX +
21 RX –
22 RX +
Using the I/O Receptacle
Insert a slotted screwdriver into the slot
above the hole you want to connect a wire
to (AWG No. 26 to 20), insert the wire in
the hole, and then pull out the slotted
screwdriver.
Caution
Do not use excessive force when inserting
the screwdriver into the slot. Doing so may
result in damage.
RS-485
TX –
TX +
Others 41