Configurations For Using Realshot Manager Advanced Client Software - Sony NSR-500 Serie Manual De Instalación

Caution
If you specify an IP address and port
number that duplicates that of an already
registered device, a warning appears and
the device cannot be registered.
Proceed to "Configuring automatic record
settings" (page 38).
Configuring automatic record
settings
Automatically start recording for all
cameras.
Select [Automatic Record Settings], and
click [Next].
The Main screen appears in a 2×2 layout,
and recording starts automatically for all
cameras.
38 Step 3: Settings
r
Notes
• The recording settings are automatically
configured based on the number of
cameras and storage capacity.
• If you want to change the recording
settings, click (Configuration) at the
top right of the Main screen, and select
[Easy Setup] in the Recorder Settings
screen that appears.
Configurations for Using
RealShot Manager
Advanced Client Software
Configure the following settings on the
NSR unit that will act as the master server.
For details on the settings, refer to the
User's Guide (PDF).
1
Configure the following settings in the
Server Configuration screen of the
Administration Menu.