Call Tone Selection - Fermax CITYLINE DUOX Serie Manual De Instalador Y Usuario

DUO DUO DUO DUO DUOX CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
DUO DUO DUOX CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
Open the door to the visitor
Auto-start (the telephone is already programmed)
If the phone is not programmed, the auto-start will not function.
· This function is possible with the panel in the same block; if the panel is in standby
and programmed as "0"; and if there is a conversation channel available.

CALL TONE SELECTION

Lock release button
Programming Button
1. With the telephone connected, press the programming button (you will hear a beep)
and without releasing it, press the lock release button. The current melody will sound.
2. Once in programming mode, press the lock release button to sequentially select the
available tones. Each time the lock release button is pressed, the selected tone is
heard.
* Once the call tone has been selected, leave the phone on standby and, after 10 seconds,
exit the programming mode (you will hear a beep).
+
¸
max. 90
Seg./Sec./Sek.
Pag 23