babymoov Maison Instrucciones De Uso página 7

• The quantities given in the table are an indication only; if
you think the result is too hot or not hot enough for your
baby, don't hesitate to reduce or increase the quantities
of water. N.B.: the material and the thickness of the bottle
and the presence of a detachable base are elements that
can affect the bottle's temperature.
• ATTENTION: to elliminate the risk of burns, always check
the temperature of the food before giving it to your baby.
For a bottle, shake it well to mix the milk. Pour a drop onto
the inside of your wrist to check its temperature. For a jar,
mix the contents and try it in order to check it is not too hot.
a - Measuring cup
b - Heating chamber
c - Bottle tray
Points to respect for trouble-free use:
- always check that the bottle is slightly open (not screwed down too tightly).
- always remove the lid from the jar.
- optimum heating will be guaranteed provided operation is not interrupted.
- use tap water only, with no added product.
NB: always use the large basket to heat bottles and jars.
By using the amounts of water indicated in the tables below, a baby bottle or jar will be heated to 30°/33°C, which is the
temperature paediatricians recommend.
The quantities given are an indication only; if you think the result is too hot or not hot enough for your baby, don't hesitate
to reduce or increase the quantities of water.
For using at home:
Place the Bottle Warmer on a flat and stable surface. Be sure the warmer and the cord are out of the reach of children.
Plug the power cord into wall outlet.
1. Fill the measuring cup with water,
following the instructions shown above,
then pour the water into the heating
chamber. Your can then place the cup
back to the holder.
2. Place the bottle tray into the heating
chamber.
3. Place the bottle into the bottle tray. If
you are using standard/small bottle,
place the adaptor ring around the bottle
for better warming result.
4. For warming baby food jar, remove the
lid and place the jar in the Food Jar Tray
and then put into the heating chamber.
Please note the bottle tray should be
placed inside the heating chamber first.
OPERATING INSTRUCTIONS
d - Baby Food Jar Tray
e - Adaptor ring
f - Indicator light
Amount of content
Weight of baby jar
BOTTLE WARMER AT HOME OR IN THE CAR • Instuction Manual
WARNINGS
• If the power supply cable gets damaged it must be
replaced by the manufacturer, the after-sales service or
people with similar qualifications, in order to avoid any
risk of danger.
• This appliance is not intended for use by persons (including
children) with impaired physical, mental, or sensory
abilities, or by persons lacking in experience or knowledge,
unless the person responsible for their safety has
supervised and instructed them in the use of this appliance.
• Chlidren should be supervised to ensure that they do not
play with the appliance.
Amount of water
measuring cup for BW
in bottle
for bottle content in
room temperature
60 ml
90 ml
120 ml
150 ml
180 ml
210 ml
240 ml
270 ml
300 ml
330 ml
Amount of water to be
put in the measuring
cup for BW for baby jar
in room temperature
120 g
200 g
250 g
g - ON button
h - Mains power cord
i - Car adaptor plug
to be put in the
measuring cup for BW
7 ml
8,5 ml
9 ml
9,5 ml
9,5 ml
10 ml
10 ml
10 ml
10 ml
10,5 ml
11 ml
20 ml
22 ml
Amount of water
to be put in the
for bottle content in
fridge temperature
9 ml
9,5 ml
10 ml
10,5 ml
11 ml
11 ml
11,5 ml
12 ml
13 ml
13 ml
Amount of water
to be put in the
measuring cup
for BW for baby jarin
fridge temperature
17 ml
25 ml
32 ml
7