Technical Characteristics - babymoov Maison Instrucciones De Uso

Thank you for choosing our bottle warmer at home or in the car.
EN
We suggest you read these instructions carefully in order to gain full bénefit
from your steriliser.
We also recommend you keep them in case you need to refer to them at a
later date.
For use at home
Power input: 220/230 V - 50 Hz
Wattage: 320 W
Quick:
• 2 1/2 minutes for one bottle.
• 3 minutes for one jar.
Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic
equipment away with un-sorted household waste, but dispose of it at a selective collection point.
PLEASE COMPLY WITH THESE SAFETY INSTRUCTIONS
• Never leave your child without supervision while the
appliance is working.
• Check that your electrical power supply voltage is
compatible with the appliance (see the details indicated
beneath the appliance).
• Use this appliance solely to heat baby bottles and jars.
Any other use might prove dangerous.
• Never switch on the appliance before pouring in a sufficient
quantity of water.
• Never add any product of any kind (salt water, medication,
detergents) to the water: this will damage the appliance.
• Never use the bottle warmer in damp surroundings and
do not place directly under the tap. Never immerse the
appliance in water or any other liquid.
• Never leave the appliance close to any source of heat
such as radiators, sunny windows, etc.
• Always use the bottle warmer on a completely flat and
dry surface, out of the reach of children.
• Do not use the bottle warmer out of doors.
• Always use the baskets to heat bottles and jars, because
failure to do so could damage the appliance.
• Don't leave the bottle or jar to heat too long, this could
encourage the development of germs in the milk or food.
• The bottles will be very hot when they come out of the
warmer. Take care when removing them.
• Do not move the appliance while it is in operation or if it
contains hot water.
• During the heating process the appliance can get very
hot. Never touch anything other than the "On" button.
• Leave the bottle warmer to cool for about 15 minutes
before using it again. Never touch the inside of the tank
while the appliance is in use, or immediately after use.
• Always unplug the appliance before cleaning or filling
and after each use.
6

TECHNICAL CHARACTERISTICS

Universal: for all types of baby bottle and jar
BOTTLE WARMER AT HOME OR IN THE CAR • Instuction Manual
For use in car
Power input: 12 V DC
Wattage: 100 W
• Do not leave the power cable at the edge of a table or
work-surface. Do not place it on a hot surface. Do not
leave the power cable dangling where a child could reach
it.
• In the interests of safety, only use Babymoov accessories
and spare parts and never dismantle the appliance.
• Avoid using your appliance if it is not working properly or
if it is damaged. If this happens, contact the Babymoov
after-sales service.
For using in car :
• Never use the bottle warmer while the vehicle is in motion.
Leave your engine running when using the bottle warmer
to avoid draining your battery.
• The car adapter cord is specially designed for this bottle
warmer: never use it with other appliances.
• Regularly check that the cigarette lighter socket in your
car. Clean it if necessary.
• If you have just used your car's cigarette lighter, allow it
to cool for five minutes in the open position before plugging
in with the bottle warmer.