EN
Refer to the Illustrative Guide (III) to check the contents of the package.
All figures are found in the inside pages of the cover.
1.
Control panel.
2.
Ventilation filters.
3.
Pulse activation button.
4.
Product technical data.
5.
Power supply connection.
6.
Lamp.
6A. Treatment surface.
6B. Skin colour sensor.
7.
Ready-for-use LEDs.
7A. Skin colour check LEDs.
8.
Error/fault LED.
9.
Power level setting buttons (+/-).
10. Stand-by LED.
11. Switch-on/stand-by button .
12. Switch-on LED.
13. Power level LEDs.
14. Lamp replacement LED.
15. Adaptor.
15A. Plug A
15B. Plug B
15C. Plug C
15D. Adaptor technical data
16. Precision Lamp (where present - for the features refer to the external
packaging)
74
16A. Treatment surface
A. Skin tone range.
For the appliance features, refer to the external packaging.
To be used only with the accessories supplied.
TREATMENT AREAS
The appliance can be used to remove unwanted body
hair in the following areas:
underarms, bikini line, arms, legs, back and chest.
Women can also use it in the part indicated by the white
dashed line.
It is important to only treat the facial areas where there
is visible thick and dark superfluous hair. Areas with thin
fair hair, often on and under the chin, must not be treated.
HAIR REMOVAL pROGRAM
A typical cycle of hair growth can take 18 to 24 months. During this time, more
sessions may be required to achieve permanent hair removal.
Hair removal efficacy varies from person to person and in different body parts,
according to the hair colour and level of tolerance of one's own skin.
Recommended treatment plan in a complete hair growth cycle:
•
Session 1 to 4: perform the sessions two weeks apart.
•
Session 5 to 7: perform the sessions four weeks apart.
EN
75